Mac系统音频测量与频谱分析工具:Electroacoustics Toolbox 3.8破解版,Electroacoustics Toolbox是一个模块化,多通道动态信号分析仪的数据采集平台。

Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities, such as equivalent and time-weighted sound levels, as well as acoustic and electroacoustic systems, such as listening rooms and loudspeakers. The software is designed to work with any Mac-compatible audio hardware and supports multiple channels of 8, 16, 24, or 32-bit data with sample rates as high as the hardware will support.
Built-in Tools:
Dual FFT Analyzer (TF/IR analyzer)
FFT Analyzer
Meter Bridge
Octave Analyzer (RTA)
Signal Generator
Sound Level Meter
X/Y Plotter
Additional Measurements:
Frequency response magnitude and phase
Impulse response
Auto and cross correlation
Time delay (latency)
Group delay
Signal-to-noise ratio (SNR)
Total harmonic distortion (THD, THD+N)
Crest factor and rms, peak, and peak-to-peak signal levels
Signal mean, variance, and standard deviation values
Flat, A, and C-weighted equivalent (Leq), time-weighted (Lp), and percentile-exceeded (Lx) sound levels
And more
Electroacoustics Toolbox is a project-based application, which allows you to configure and save project files. Projects may contain one or more tools available in the toolbox, along with any captured data associated with those tools. Electroacoustics Toolbox allows for the creation of an arbitrary number of tools of a certain type, or tools of different types. For example, a project may contain an oscilloscope, two FFT analyzers, and two signal generators. The oscilloscope and FFT analyzers may each simultaneously analyze multiple input channels of a single device. However, there is no requirement that all tools must work with the same device. The Toolbox also offers advanced capabilities for configuring input and output device parameters and assigning labels, units, and transducer sensitivities to individual input and output channels.
Hardware-accelerated OpenGL graphics for fast real-time plotting
Quartz-based graphics for high-resolution still images and prints
Advanced control over input and output devices
Whole device and individual channel sensitivity (level) calibration
Support for units, including Volts, Amps, pascals, and Engineering Units
Saving complete configurations and data in project files
Exporting data to ascii text or MAT-files for easy import into other applications
Work with multiple independent audio devices simultaneously
No arbitrary limits on how many devices or channels are used, or on sample rates or signal formats–these are limited only by your hardware
AppleScript support for measurement automation and remote control



网站资源属于虚拟商品,具有可复制可传播性,一旦购买,不接受任何形式的退款要求。 请您在购买获取之前确认好是否是您所需要的资源,软件资源请先自行下载试用版试用再购买。

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

新疆与台湾地区是百度云的限制区,无法打开百度云分享链接属于正常情况。 解决方案: 海外同胞可以使用梯子,链接大陆网络即可打开!打开之后转存到自己的网盘再下载 国内朋友如遇到打不开,请检查自己的浏览器谷歌浏览器 以及防火墙。